NEC SL1100 Feature Manual page 266

SL1100
Programming Department Calling Group Overflow for a DIL to the Master Number
1. Set up the Department Group.
Program
Number
16-02-01
V
11-07-01
2. Set up a DIL for the Department Group.
Program
Number
22-02-01
22-07-01
22-08-01
3. Set how long a DIL rings in the Department Group before overflow occurs.
Program
Number
22-01-04
4. Set up the Department Group Mailbox.
Program
Number
47-03-02
47-03-03
2-248
Program Name
Department Group Assign-
ment for Extensions
Department Group Pilot Num-
bers
Program Name
Incoming Call Trunk Setup
DIL Assignment
DIL/IRG No Answer Destina-
tion
Program Name
DIL No Answer Recall Time
Program Name
Group Mailbox Number (Mail-
box Number)
Group Mailbox Type (Mailbox
Type)
Description
Assign telephone extensions to a Department Group.
Assign the InMail extensions to a unique Department Group (e.g.,
2).
No other extensions should be in this group.
These extensions are the extensions the system assigns to the In-
Mail.
Do not use Department Group 1.
Be sure to set up the Department Group in order. (For example, the
first extension should be order 1, the second order 2, etc.)
Assign master (pilot) numbers to Department Groups.
Description
Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
For each DIL you want to ring the Department Group directly, enter
the Department Group master number.
By default, no DIL destinations are programmed.
For each DIL to the Department Group master number, enter 102 to
make InMail the overflow (no answer) destination.
By default, the overflow (no answer) destination is Incoming Ring
Group 1.
Description
Set how long (0 ~ 64800 seconds) the DIL rings in the Department
Group before overflow occurs.
By default, this interval is 0 (no overflow).
Description
The Group Mailbox number must be the same as the Department
Group master number.
By default, no Group Mailbox numbers are assigned.
Assign the Group Mailbox category ( 2 = Routing, 1 = Subscriber, 0
= None).
By default, the Group Mailbox type is 1 (Subscriber).
ISSUE 3.5
Voice Mail Overflow