NEC SL1100 Feature Manual page 16

SL1100
Day Mode
1. Press the programmable function key assigned as the night (night mode 2) key.
2. Dial 09 + 2 (for night mode 2).
You hear confirmation beep.
This allows the user to switch the system from the day mode to night mode 2.
3. Press Speaker key to hang up.
Allow the extension to switch the system night mode.
1. In 20-07-01 Manual Night Mode Switching, enter 1 to enable night mode switching in the
extension Class of Service.
By default, this feature is Enabled.
By default all COS have this option enabled. (V3.5 or higher)
2. In 20-06-01 Class of Service for Extensions, assign the extension Classes are disabled.
By default, extension, Extension 101 is Class 15 and other Extensions are Class of Service 1.
Set up a Group Mailbox as a Call Routing Mailbox.
1. In 11-07-01 Department Group Pilot Numbers, assign a pilot number (e.g., 200) to an unused
Department Group (e.g., group 10).
By default, all extensions are assigned to group 1.
2. In 47-03-02 Group Mailbox Number, enter the pilot number assigned in step 1 above.
By default, no Group Mailbox numbers are assigned.
3. In 47-03-03 Group Mailbox Type, enter 1 to assign the Group Mailbox as a Call Routing Mailbox.
By default, Group Mailboxes are assigned as Subscriber Mailboxes (3).
4. In 11-07-01 Department Group Pilot Numbers, press Flash key to remove the assignment made
in step 1 above.
You can use the Department Group for other programming.
Set up a virtual extension that will handle the switching for the trunk.
1. In 11-04-01 Virtual Extension Numbering, assign the Group Mailbox Number in step 2 as the
extension number for a virtual extension port.
For example, assign extension 200 to virtual extension port 1.
By default, there are no virtual extension numbers assigned.
1-8
ISSUE 3.5
Quick Setup