NEC SL1100 Feature Manual page 260

SL1100
Department Calling Group Overflow.
Screened Transfer on page 2-217
A Screened Transfer from the InMail Automated Attendant to a Department Group master number can
overflow to the group Mailbox.
Unscreened Transfer on page 2-238
An Unscreened Transfer from the InMail Automated Attendant to a Department Group can overflow to
the group Mailbox.
Programming
V
Programming DIL Overflow
1. Set up Direct Inward Lines.
Program
Number
22-02-01
22-07-01
2. Assign InMail as the overflow (no answer) destination.
Program
Number
22-08-01
3. Set the interval after which unanswered calls should route to the overflow destination.
Program
Number
22-01-04
2-242
Program Name
Incoming Call Trunk Setup
DIL Assignment
Program Name
DIL/IRG No Answer Destina-
tion
Program Name
DIL No Answer Recall Time
Description
Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
For each trunk designated as a DIL above, enter the extension
number of the DIL destination (e.g., 306). Make a separate entry for
each Night Service mode.
By default, no DIL destinations are programmed.
Description
For each trunk assigned as a DIL above, enter the InMail Depart-
ment Group pilot number to make InMail the overflow (no answer)
destination.
By default, the overflow (no answer) destination is Incoming Ring
Group 1.
Description
Enter the interval (0 ~ 64800 seconds) after which unanswered calls
should overflow to the programmed overflow (no answer) destina-
tion.
By default, this interval is 0 (no overflow).
ISSUE 3.5
Voice Mail Overflow