NEC SL1100 Feature Manual page 86

SL1100
Program
Number
47-01-04
8. Enable or disable the ability of the Directory Dialing Mailbox to detect and route incoming faxes.
Program
Number
47-15-07
D
9. Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to return to the
Automated Attendant.
Program
Number
47-15-08
10. Enable Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory
Dialing Mailbox.
See Answer Table on page 2-19
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing Mailbox.
11. Enable callers to access Directory Dialing from a Dial Action Table action.
Make sure you have an action in the active Dial Action Table that is a GOTO to the Directory
Dialing Mailbox.
See Dial Action Table on page 2-60
By default, no actions are assigned as a GOTO to a Directory Dialing Mailbox.
2-68
Program Name
Non-Subscriber Message
Length
(Mbox Msg Length)
Program Name
Fax Detection
Program Name
Next Call Routing Mailbox
for more.
for more.
Description
This option sets the maximum message length (1 ~ 4095 seconds)
for Instruction Menus.
By default, this option is 120 seconds.
Description
Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the
Directory Dialing Mailbox detects incoming fax CNG tone, it routes
the call to the fax extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-96
By default, Fax Detection is disabled (0).
Description
Assign a Next Call Routing Mailbox (1 ~ 32) to the Directory Dialing
Mailbox.
To remove an assignment, press Hold key.
Once assigned, dialing # returns to the Automated Attendant. Dial-
ing 0 follows the 0 action of the Next Call Routing Mailbox.
By default, no Next Call Routing Mailbox is assigned.
ISSUE 3.5
for more.
Directory Dialing