NEC SL1100 Feature Manual page 51

ISSUE 3.5
Fax Detection on page 2-96
The Automated Attendant can route outside calls to the company fax machine.
Multiple Company Greetings on page 2-192
One InMail system can provide individual greetings and dialing options for several companies.
Programming
1. Assign Answer Tables to trunks.
Program Program Name
Number
47-10-01 Answer Table Assignment (An-
swer Table)
2. Set up the Automated Attendant to answer trunk calls.
Program Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
3. Set up the Answer Tables.
Turn to Answer Table on page 2-19
By default, all trunks use Answer Table 1. Answer Schedule 1 is active and runs continuously.
4. Set up the Call Routing Mailboxes.
Turn to Routing Mailbox on page 2-213
The active schedule (Answer Table 1, Answer Schedule 1) uses Call Routing Mailbox 000.
5. Set up the Dial Action Tables.
Turn to Dial Action Table on page 2-60
By default, Call Routing Mailbox 000 uses Dial Action Table 1.
InMail Feature Manual
Assign an Answer Table (1 ~ 8) to each trunk that the Automated
Attendant should answer.
By default, all trunks are assigned to Answer Table 1.
Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, all trunks are Service Type 0 (Normal).
For each trunk you designated as a DIL above, enter the InMail pilot
number. Make a separate entry for each Night Service mode.
By default, no DIL destinations are programmed.
for more information.
for more information.
for more information.
SL1100
Description
Description
A
2-33