NEC SL1100 Feature Manual page 258

SL1100
Programming
1. Assign the UTRF action to a key on the active Dial Action Table.
Program
Number
47-13-01
U
2. Optionally set the telephone system Transfer Recall interval.
Program
Number
24-02-04
Operation
Not applicable.
2-240
Program Name
Dial Action Tables: UTRF Ac-
tion - Unscreened Transfer (2)
(UTRF)
Program Name
Transfer Recall Time
Description
Normally, the corresponding Number option should be XXX. Note
that the key you choose for this action is the first digit of the called
extension number.
• For example, to allow callers to place Unscreened Transfers to
extensions 101 ~ 212 (V3.5 Changed), for key 3 enter UTRF for
the Action and XXX for the corresponding Number.
To have Unscreened Transfer call a specific extension, the corre-
sponding Number option should be that extension's number. The
caller then dials that single digit to reach the extension.
• For example, to have callers dial 8 to reach extension 303, for
key 8 enter UTRF for the Action and 303 for the corresponding
Number.
By default, key 0 and TIMEOUT are both UTRF actions to 101. In
addition, key2 or 3 are (V3.5 Changed) UTRF action to XXXX.
Description
Unanswered Unscreened Transfers route to the extension mailbox
after this interval (0 ~ 64800 seconds).
By default, this interval is 30 seconds.
ISSUE 3.5
Unscreened Transfer