NEC SL1100 Feature Manual page 40

SL1100
The Call Routing Mailbox provides the dialing instructions (Dial Action Table) and announcements to
Automated Attendant Callers.
Dial Action Table on page 2-60
The Dial Action Table defines the dialing options for the Call Routing Mailbox chosen by the Answer
Table, which in turn provides those options to Automated Attendant callers.
Programming
1. Assign Answer Tables to trunks.
Program
A
Number
47-10-01
2. Set up the Automated Attendant to answer trunk calls.
Program
Number
22-02-01
22-07-01
3. Select the Answer Table to be customized.
Program
Number
47-11
47-11-04
47-11-03
2-22
Program Name
Answer Table Assignment
(Answer Table)
Program Name
Incoming Call Trunk Setup
DIL Assignment
Program Name
InMail Answer Table Options
Next Answer Table
Default Mailbox Category
(Default MB Ctg) and
Default Mailbox Number
(Default MB Num)
Description
Assign an Answer Table (1 ~ 8) to each trunk that the Automated
Attendant should answer.
By default, all trunks are assigned to Answer Table 1.
Description
Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
For each trunk you designated above, enter the InMail pilot number.
Make a separate entry for each Night Service mode.
By default, there are no DIL destinations programmed.
Description
Select the Answer Table to be customized (1 ~ 8).
If 10 Answer Schedules in an Answer Table are not sufficient, enter
the number of the Answer Table to which you want to link the selec-
ted table. InMail treats the two linked tables as a single 20 entry An-
swer Table.
By default, Answer Tables are not linked (Undefined).
Set the mailbox the Answer Table uses if no Answer Schedule is in
effect.
By default, this option is 3 (Routing Mailbox) for Answer Table 1
and 0 (undefined) for all other Answer Tables.
ISSUE 3.5
Answer Table