NEC SL1100 Feature Manual page 150

SL1100
Error Message
VMDB is not attached.
Mailbox "XXX" does not exist. (XXX = mailbox
number)
The mailbox is being used by another session.
There is no available space in the CF.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
I
Cannot upload the file since the original file is
being used by another session. Please try
again later.
Guide to Feature Programming
Program
No.
90-02-01 Programming Password Setup - User Name
90-02-02 Programming Password Setup - Password
90-02-03 Programming Password Setup - User Level
Operation
Listening to Voice Mail Messages using User Admin Mode (UA)
All messages stored on the InMail can be accessed via the Mailbox User Mode for playback, or
deletion.
1. To log in, open an Internet browser and enter the IP of the SL1100 LAN port in the address line.
At default the IP Address is 192.168.0.10.
2-132
The VMDB is not attached.
The mailbox does not exist.
When the mailbox is being used by another session, either PC or phone.
When there is no available space in the CF.
When the file to be downloaded is being used by another session, either PC
or phone.
When the file selected for download has already been deleted.
When the file selected for deletion is being used by another session.
When the file selected for deletion has already been deleted.
When the file to be replaced is being used when trying to upload the re-
placement.
Program Name / Description
Cause
Input Data
Maximum 10 characters
Up to eight digits
0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator
Level 1)
4 = SB (System Administrator
Level 2)
5 = UA (User Programming Ad-
minister Mode Level 1)
InMail Upload Download Audio
ISSUE 3.5
Default
Refer to the Program-
ming Manual for the
default values.
Refer to the Program-
ming Manual for the
default values.
Refer to the Program-
ming Manual for the
default values.