NEC SL1100 Feature Manual page 85

ISSUE 3.5
4. Specify the required number of letters of the employee name the caller must dial.
Program Program Name
Number
47-15-01 Minimum Number of Letters
Required
5. Select Screened or Unscreened Transfer call routing, when Directory Dialing finds a name match.
Unscreened Transfer
Program Program Name
Number
47-15-04 Transfer Option
Screened Transfer
Program Program Name
Number
47-15-04 Transfer Option
47-15-05 Screened Transfer Timeout
6. Change the amount of time Directory Dialing callers have to dial letters.
Program Program Name
Number
47-15-06 Time Limit for Dialing Com-
mands
7. Record a Directory Dialing Message.
See Operation on page
The Directory Dialing Message is the Instruction Menu for the Routing Mailbox programmed as a
Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is, "Please enter one
or more letters of the person's name, then press the pound key."
InMail Feature Manual
Specify how many letters of an employee's name the caller must di-
al to use Directory Dialing. If the caller dials less than the specified
minimum number of letters, InMail cannot route the call. The entries
are 1 ~ 3 (1 ~ 3 letters).
By default, callers must dial at least 1 letter of the employee's name
(1).
Enter 1 to route the call as an Unscreened Transfer.
By default, InMail routes the call as a Screened Transfer (0).
Enter 0 to route the call as a Screened Transfer.
By default, InMail routes the call as a Screened Transfer (0).
Set how long a Screened Transfer from the Directory Dialing Mail-
box will ring an unanswered extension before recalling. The entries
are 1 ~ 255 seconds or 0 for no recall.
By default, the Screened Transfer Timeout interval is 15 seconds.
Enter the new timeout duration (0 ~ 99 seconds).
If the caller waits too long to dial, the Directory Dialing Message re-
peats.
By default, Directory Dialing callers have 5 seconds to dial letters.
2-72.
SL1100
Description
Description
Description
Description
D
2-67