NEC SL1100 Feature Manual page 265

ISSUE 3.5
3. Set how long the call will ring in the Department Group before overflow occurs.
Program Program Name
Number
24-02-04 Transfer Recall Time
4. Set up the Department Group Mailbox.
Program Program Name
Number
47-03-02 Mailbox Number
47-03-03 Mailbox Type
5. Set up the options for the Group Mailbox used for Department Group overflow.
If you entered 2 (Call Routing) for 47-03-03 Group Mailbox Type:
• 47-07 InMail Routing Mailbox Options
• 47-08 Routing Mailbox Call Routing Options
• 47-09 Announcement Mailbox Options
If you entered 1 (Subscriber) for 47-03-03 Group Mailbox Type:
• 47-06-01 Number of Messages
• 47-06-02 Message Playback
• 47-06-03 Auto Erase/Save of Messages
• 47-06-05 Recording Conversation Beep (Rec Conv Beep)
• 47-06-06 Message Waiting Lamp (Update MW Lamp)
• 47-06-07 Auto Attendant Direct to Voice Mail
• 47-06-08 Forced Unscreened Transfer (Forced UTRF)
• 47-06-09 Auto Time Stamp
• 47-06-10 System Administrator (System Admin)
• 47-06-11 Dialing Option
• 47-06-12 Next Call Routing Mailbox (Next CR Mbox)
InMail Feature Manual
Description
Set how long (0 ~ 64800 seconds) the Unscreened Transfer from
the InMail Automated Attendant rings in the Department Group be-
fore overflow occurs.
By default, this interval is 30 seconds.
Description
The Group Mailbox number must be the same as the Department
Group master number.
By default, no Group Mailbox numbers are assigned.
Assign the Group Mailbox category (2 = Routing, 1 = Subscriber, 0
= None).
By default, the Group Mailbox type is 1 (Subscriber).
SL1100
V
2-247