Config Commands; Config Acl Create; Config Acl Delete; Config Acl Rule Create - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Service Type Field Match
Service Type Field Value

Config Commands

config acl create

This command creates an Access Control List (ACL) that is identified by the parameter
The ACL number is an integer from 1 to 100.
Default
Format

config acl delete

This command deletes an ACL that is identified by the parameter
Format

config acl rule create

This command creates a rule within the ACL referenced by the parameter
identified by the
<rulenum>
ranges from 1 to 10. Rules are created with a default action of deny.
<rulenum>
Default
Format

config acl rule delete

This command removes a rule from the ACL referenced by the parameter
identified by the
<rulenum>
10-2
Indicates whether an IP DSCP, IP Precedence, or IP TOS match condition is
specified for this rule.
Indicates the value specified for the Service Type Field Match (IP DSCP, IP
Precedence, or IP TOS).
none
config acl create <aclid>
config acl delete <aclid>
parameter. An ACL may have up to 10 user-specified rules, whose
none
config acl rule create <aclid> <rulenum>
parameter.
202-10009-01
<aclid>.
from the system
<aclid>
The rule is
<aclid>.
The rule is
<aclid>.
ACL Commands
.