Three-Phase 600 V Class Drive Models 5A0041 To 5A0099 - YASKAWA P1000 Technical Manual

u

Three-Phase 600 V Class Drive Models 5A0041 to 5A0099

Drive Models
Maximum Applicable Motor Capacity (HP)
<1>
Input Current (A)
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity (kVA)
Rated Output Current (A)
Output
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 575 V.
<4> Carrier frequency default setting is Swing PWM 1 (C6-02 = 7). C6-02 settings 1, 7, 8, 9, and A do not require current derating. All other settings
raise the carrier frequency and require current derating.
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
Table A.8 Power Ratings Continued (Three-Phase 600 V Class)
Item
ND Rating
<2>
ND Rating
Rated Voltage
Rated Frequency
ND Rating
<3>
ND Rating
ND Rating
Overload Tolerance
Carrier Frequency
5A0041 5A0052
40 50
44 54
Three-phase 500 to 600 Vac 50/60 Hz
50 62
<4>
41 52
<4>
41 52
ND Rating: 120% of rated output current for 60 s
(Derating may be required for applications that start and stop frequently)
User-adjustable between 1 and 10 kHz
Three-phase 500 to 600 V (proportional to input voltage)
A.1 Power Ratings
Specification
5A0062 5A0077
60 75
66 80
-10 (-15) to +10%
±5%
75 91
62 77
62 77
<4>
400 Hz (user-set)
5A0099
100
108
123
99
99
User-
adjustable
between 1 and
<4>
8 kHz
A
401