Power Ratings; Power Ratings; Three-Phase 200 V Class Drive Models 2A0011 To 2A0088 - YASKAWA Z1000 User Manual

A.1 Power Ratings
A.1 Power Ratings
u

Three-Phase 200 V Class Drive Models 2A0011 to 2A0088

Item
CIMR-Zo2A
Maximum
Applicable
Motor
Capacity
<1>
Input Current (A)
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Minimum Power Supply Capacity (kVA)
Rated Output Capacity (kVA)
Rated Output Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
Harmonics
DC Link Choke
Reduction
EMC Filter (IEC/EN 61800-3 Category 2)
<1> The motor capacity (HP) refers to an NEC Table 430.250 208 V motor. The rated output current of the drive output amps should be equal to or
greater than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 230 V.
<4> Carrier frequency is set to 5 kHz. Current derating is required to raise the carrier frequency.
268
Table A.1 Power Ratings (Three-Phase 200 V Class)
0011
HP 3
kW 2.2
<2>
10.6
5
<3>
4.2
10.6
0017 0024
5 7.5
3.7 5.5
16.7 24.2
Three-phase 200 to 240 Vac 50/60 Hz
7 11
6.7 10
<4> <4> <4>
16.7 24.2 30.8
110% of rated output current for 60 s
140% of rated output current for 0.5 s
User adjustable between 1 and 12.5 kHz
(Maximum Frequency varies with Rated Output Capacity)
Three-phase 200 to 240 V (proportional to input voltage)
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
Specification
0031 0046 0059
10 15 20
7.5 11 15
30.8 46.2 59.4
-15 to 10%
±5%
13 20 25
12 18 24
<4> <4> <4>
46.2 59.4
240 Hz
Built-in
Built-in
0075 0088
25 30
18.5 22
74.8 88
32 37
30 35
<4> <4>
74.8 88