Logic Function 1 Source 1 Invert; Logic Function 1 Source 2; Logic Function 1 Source 2 Invert; Logic Function 1 Output Invert/Logic Function 1 Delay - Emerson Unidrive M200 Parameter Reference Manual

Logic Function 1 Source 1 (09.004) defines input souce 1 of logic function 1.
Parameter

09.005 Logic Function 1 Source 1 Invert

Short description Set to invert input 1 of logic function 1
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit User Save
Display Format Standard
Coding RW
Setting Logic Function 1 Source 1 Invert (09.005) inverts input 1 of logic function 1.
Parameter

09.006 Logic Function 1 Source 2

Short description Defines input source 2 of logic function 1
Mode Open‑loop
Minimum 0.000
Default 0.000
Type 16 Bit User Save
Display Format Standard
Coding RW, PT, BU
Logic Function 1 Source 2 (09.006) defines input source 2 of logic function 1.
Parameter

09.007 Logic Function 1 Source 2 Invert

Short description Set to invert input 2 of logic function 1
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit User Save
Display Format Standard
Coding RW
Setting Logic Function 1 Source 2 Invert (09.007) inverts input 2 of logic function 1.
Parameter 09.008 Logic Function 1 Output Invert
Short description Set to invert the ouptut of logic function 1
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit User Save
Display Format Standard
Coding RW
Setting Logic Function 1 Output Invert (09.008) inverts the output of logic function 1.
Parameter 09.009 Logic Function 1 Delay
Short description Defines the output delay of logic function 1
Mode Open‑loop
Minimum -25.0
Default 0.0
Type 16 Bit User Save
Display Format Standard
Coding RW
Logic Function 1 Delay (09.009) defines the delay at the output of logic function 1. If Logic Function 1 Delay (09.009) is positive then the output does not
become 1 until the input to the delay has been at 1 for the delay time. If Logic Function 1 Delay (09.009) is negative then the output remains at 1 until
the input to the delay has been 0 for the delay time.
130
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 30.999
Units
Update Rate Drive reset read
Decimal Places 3
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 25.0
Units s
Update Rate 4ms read
Decimal Places 1
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10