Percentage Trim; Reference Select Flag 1 - 3; Preset Select Flag 1/2 - Emerson Unidrive M200 Parameter Reference Manual

Parameter

01.038 Percentage Trim

Short description Defines the value of the reference trim as a percentage
Mode Open‑loop
Minimum -100.00
Default 0.00
Type 16 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Offset (01.004).
Parameter 01.041 Reference Select Flag 1
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Selector (01.014).
Parameter 01.042 Reference Select Flag 2
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Selector (01.014).
Parameter 01.043 Reference Select Flag 3
Short description Defines which reference is selected by the drive
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Selector (01.014).
Parameter 01.045 Preset Select Flag 1
Short description Defines which preset is selected by the drive
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Selector (01.014).
Parameter 01.046 Preset Select Flag 2
Short description Defines which preset is selected by the drive
Mode Open‑loop
Minimum 0
Default 0
Type 1 Bit Volatile
Display Format Standard
Coding RW, NC
See Reference Selector (01.014).
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
Maximum 100.00
Units %
Update Rate 4ms read
Decimal Places 2
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
Maximum 1
Units
Update Rate 4ms read
Decimal Places 0
25