Emerson Unidrive M200 Parameter Reference Manual page 249

Trip C.Err
Value 182
Short description NV media card data structure error detected
An attempt has been made to access a NV media card, but an error has been detected in the data structure on the card. Resetting this trip will cause the drive to erase the <MCDF>
folder from the NV media card (if it exists) and create the correct folder structure. On an SD card, whilst this trip is still present, missing directories will be created, and if the header
file is missing it will be created. The following sub-trip numbers are used with this trip.
Sub-
Reason
trip
1 The required folder and file structure is not present.
2 The <000> file is corrupted.
Two or more files in the <MCDF\> folder have the same file identification
3
number.
Recommended actions:
Erase all the data block and re-attempt the process.
Ensure the card is located correctly.
Replace the NV media card.
Trip C.Ful
Value 184
Short description NV media card is full
An attempt has been made to write to a NV media card, but there is insufficient space available. No data is transferred.
Recommended actions:
Delete a data block or the entire NV media card to create space.
Replace the NV media card.
Trip C.OPt
Value 180
Short description Option difference detected
A parameter file has been transferred from a NV media card to the drive, but the option module fitted is different between source and target drives. This trip does not stop the data
transfer, but is a warning that the data for the option module will be set to the default values and not the values from the card. This trip also applies if a compare is performed between
a parameter file on a card and the drive and the option module fitted is different between the source and target.
Recommended actions:
Ensure the correct option modules are installed.
Press the red reset button to acknowledge that the parameters for the option module installed will be at their default values.
This trip can be suppressed by setting Pr mm.000 to 9666 and resetting the drive.
Trip C.Pr
Value 175
Short description Product difference detected
Product or derivative are incompatible between the source and target drives.
Sub-trip Reason
If Drive Derivative (11.028) is different between the source and target drives. This trip is initiated
1 either at power-up or when the SDcard is accessed. This trip can be reset and data can be
transferred in either direction between the drive and the card.
If Product Type (11.063) is different between the source and target drives or the file is corrupted or
2 incompatible. This trip is initiated either at power-up or when the SDcard is accessed. This trip can
be reset but no data are transferred in either direction between the drive and the card.
3 Reserved
Recommended actions:
Sub-trip Actions
Use a different NV media card or choose a file compatible between the source and target drives.
1
This trip can be suppressed by setting Pr mm.000 to 9666 and resetting the drive.
2 Use a different NV media card or choose a file compatible between the source and target drives.
Trip C.rdo
Value 181
Short description Attempt to overwrite protected data detected
An attempt has been made to modify data on a read-only NV media card or to modify a read-only file (i.e. erase the card, erase a file or create a file). No data is transferred.
Recommended actions:
Clear the read only flag by setting Pr mm.000 to 9777 and reset the drive. This will clear the read only flag for all data blocks in the NV media card.
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
249