Table of Contents
Advertisement
Preface
Safety Guide
This section describes the safety guide you need to know before operating the machine, such as installation
location and power connection. Make sure to read this section.
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Warning indications
The following warning indications are used to ensure correct use of this machine and to prevent injuries or
property damage.
Ensure the content is understood clearly before proceeding to the main text.
Ignoring these indications and handling the machine incorrectly may cause death or serious injury.
Ignoring these caution indications and handling the machine incorrectly may cause injury or property
damage.
Installation Location
●
Do not place the machine on an unstable surface,
such as on an unstable stand or inclined surface.
Failure to do so may result in the machine falling down
or falling over, causing an injury.
●
Keep the machine away from dusty or humid
environments to avoid the risk of fire or electric shock.
Power Connection
●
Use only the AC adapter specified for this machine to
avoid the risk of fire, electric shock or breakdown of
the machine.
●
Power supply to the AC adapter must be 100-240V
and over (number of Amps will be inserted later) A to
avoid the risk of fire, electric shock or breakdown of
the machine.
●
Keep the AC adapter away from sources of heat such as
heating appliances. Failure to do so may result in melting
of the coating on the AC adapter and may cause fire,
electric shock or breakdown of the machine.
●
Specifications for the power cable and extension
cable depend on your power voltage. Use of incorrect
cables may cause fire, electric shock or breakdown of
the machine.
•
Maximum length of a power cable is 4.5 meters
and extension cable 5 meters.
•
If your power source is 100-120V, use a cable
suitable for 125V/8A or above, and do not extend
the cable for more than 5 meters.
•
If your power source is 220-240V, use a cable
suitable for 250V/5A or above, and do not extend
the cable for more than 5 meters.
●
Do not use the power cable tied up or coiled to avoid
the cable heating up and causing a fire.
●
Do not use a multiple socket
adapter or extension cable, or
overload the electrical circuit. If an
extension cable is needed, use a
cable suitable for 125V/8A or above,
and do not extend the cable for
more than 5 meters to avoid the
risk of fire or electric shock.
｜10｜
Advertisement
Table of Contents
Troubleshooting
