Configuration Upgrade & Backup > Configuration Restore From Tftp; Configuration Upgrade & Backup > Configuration Backup To Http; Configuration Upgrade & Backup > Configuration Backup To Tftp - D-Link DMS-1100-10TS User Manual

Destination URL
Startup-config
Click Restore button to upload configuration to the Switch via HTTP.
Configuration Upgrade & Backup > Configuration Restore from TFTP
The Configuration Restore from TFTP page allows user to load the Switch's configuration from a saved
configuration file using TFTP.
Figure 4.15 – Tool Menu > Configuration Upgrade & Backup > Configuration Restore from TFTP
The fields that can be configured for Configuration Restore from TFTP are described below:
Item
TFTP Server IP
Destination URL
Startup-config
Source URL
Click the Restore button to upgrade the configuration from specified TFTP address.
Configuration Upgrade & Backup > Configuration Backup to HTTP
The Configuration Backup to HTTP page allows user to save the current configuration to a file.
Figure 4.16 – Tool Menu > Configuration Upgrade & Backup > Configuration Backup to HTTP
Configuration Upgrade & Backup > Configuration Backup to TFTP
The Configuration Backup to TFTP page allows user to save the current configuration to a file using TFTP.
Figure 4.17 – Tool Menu > Configuration Upgrade & Backup > Configuration Backup to TFTP
Displays the destination URL to upgrade to.
Check the box to enable the startup configuration function.
Table 4.6
Description
Select IPv4 or IPv6 and enter the address to be configured.
Displays the destination URL address.
Check the box to enable the startup configuration function.
Enter the source URL address.
Table 4.7
22
D-Link DMS-1100 Series User Manual