Firmware Upgrade; Configuration File Backup/Restore - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
NOTE: Upon this firmware release, some functions of the SIM can only be configured
through the Command Line Interface. See the DES-30XX CLI Manual for more
information on SIM and its configurations.

Firmware Upgrade

This screen is used to upgrade firmware from the Commander Switch to the Member Switch. To access the following window,
click Administration > Single IP Setting> Firmware Upgrade. Member Switches will be listed in the table and will be
specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To specify a certain Switch
for firmware download, click its corresponding check box under the Port heading. To update the firmware, enter the Server IP
Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file transfer.

Configuration File Backup/Restore

This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP server.
Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address,
Model Name and Version. To specify a certain Switch for upgrading configuration files, click its corresponding radio button
under the Port heading. To update the configuration file, enter the Server IP Address where the file resides and enter the
Path/Filename of the configuration file. Click Download to initiate the file transfer from a TFTP server to the Switch. Click
Upload to backup the configuration file to a TFTP server.
Figure 6- 50. Firmware Upgrade window
Figure 6- 51. Configuration File Backup/Restore window
65