Show Platform Qos - Cisco Catalyst 3750-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform qos

Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
Syntax Description label asic number
policer {parameters asic number |
port alloc number asic number}
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
OL-29704-01
show platform qos {label asic number | policer {parameters asic number |
port alloc number asic number}}
Modification
This command was introduced.
Display QoS label maps for the specified ASIC.
(Optional) For asic number, the range is 0 to 1.
Display policer information. The keywords have these
meanings:
parameters asic number—Display parameter
•
information for the specified ASIC. The range is 0 to 1.
port alloc number asic number—Display port allocation
•
information for the specified port and ASIC. The port
allocation range is 0 to 25. The ASIC range is 0 to 1.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform qos
C-33