Basic Operation; Turning On And Off The Omniscan Mx - Olympus OmniScan MX2 User Manual

8. Basic Operation

This chapter describes the basic principles and procedures involved in operating the
OmniScan MX.
8.1

Turning On and Off the OmniScan MX

To turn on the OmniScan MX
In order to prevent injury, do not place your fingers between the acquisition module
and the instrument's support stand (when unfolded).
 Press and hold the Power key (
The system starts up, performs a memory check, and displays the OmniScan logo
and software version number. If there is more than one application installed on
your instrument, each application will be displayed on one of the buttons
appearing on the OmniScan splash screen. Choose the desired inspection
application by pressing the "
button.
DMTA-20015-01EN [U8778402], Rev. J, January 2014
) for one second.
" (Parameter) key corresponding to the appropriate
F
Basic Operation 87