Acquisition Specifications; Data Specifications; Table 57 Acquisition Specifications; Table 58 Data Specifications - Olympus OmniScan MX2 User Manual

J.2

Acquisition Specifications

This section details the acquisition specifications of frequency, data display, and
synchronization (see Table 57 on page 165).
Digitizing frequency
A-scan (acquisition
mode)
Maximum pulsing rate
Depth in material
Refresh rate
Envelope (echo-dynamic
mode)
On internal clock
External pace
On encoder
J.3

Data Specifications

This section details the data specifications of processing, TCG, and storage (see
Table 58 on page 165).
Number of data points
Real-time averaging
Rectification

Table 57 Acquisition specifications

Frequency
100 MHz (10 bits)
Up to 6000 A-scans per second (512-point,
8-bit A-scan)
Up to 10 kHz (C-scan)
59.8 meters in steel (longitudinal wave),
10 ms with compression
0.49 meter in steel (longitudinal wave),
81.9 µs without compression
Display
A-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Yes: Volume-corrected S-scan (30 Hz)
Synchronization
1 Hz to 10 kHz
Yes
On 2 axes: from 1 step to 65536 steps

Table 58 Data specifications

Processing
Up to 8000
2, 4, 8, and 16
RF, full wave, half wave+, half wave–
OMNI-M-PA3232 Module Specifications
DMTA-20015-01EN [U8778402], Rev. J, January 2014
165