Warnings - Olympus OmniScan MX2 User Manual

Warnings

General Warnings
• Carefully read the instructions contained in this instruction manual prior to
turning on the instrument.
• Keep this instruction manual in a safe place for further reference.
• Follow the installation and operation procedures.
• It is imperative to respect the safety warnings on the instrument and in this
operation manual.
• If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment could be impaired.
• Do not install substitute parts or perform any unauthorized modification to the
instrument.
• Service instructions, when applicable, are for trained service personnel. To avoid
the risk of electric shock, do not perform any work on the instrument unless
qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.
• Do not touch the connectors directly by hand. Otherwise, a malfunction or electric
shock may result.
• Do not allow metallic or foreign objects to enter the device through connectors or
any other openings. Otherwise, a malfunction or electric shock may result.
Electrical Warnings
• Before turning on the instrument, you must connect the protective earth terminal
of the instrument to the protective conductor (mains) of the power cord. The
mains plug shall only be inserted into a socket outlet provided with a protective
earth contact. Never negate the protective action by using an extension cord
(power cable) without a protective conductor (grounding).
DMTA-20015-01EN [U8778402], Rev. J, January 2014
Important Information — Please Read Before Use 11