O.1
Acoustic Specifications
This section details the acoustic specifications of the pulser, receiver, and beam
formation (see Table 74 on page 195).
Voltage
UT channel quantity
Pulse-echo mode
Pitch-and-catch mode
Pulse width
Fall time
Pulse shape
Output impedance
Gain range
Input impedance
System bandwidth
When used in pulse-echo mode, pulses occur on both the
pulse-echo mode is selected, Olympus recommends using only one probe on the
connector.
DMTA-20015-01EN [U8778402], Rev. J, January 2014
Table 74 Acoustic specifications
Pulser
95 V, 175 V, and 340 V
2
Pulser 1 to pulser 1
Pulser 2 to pulser 2
Pulser 1 to receiver 1
Pulser 2 to receiver 2
Adjustable from 30 ns to 1000 ns; resolution
of 2.5 ns
<10 ns
Negative square pulse
<30 Ω
Receiver
0 dB to 120 dB maximum input signal
34.5 Vp-p (full-screen height)
Ω
64
in pulse-echo mode
Ω in pulse-receive mode
51
0.26 MHz to 27 MHz (–3 dB)
OMNI-M2-UT-2C Module Specifications
1 and
1 connectors. When
P
R
1
P
195