Parameter Keys; Indicator Lights; Keypad Indicator Light; Power Indicator Light - Olympus OmniScan MX2 User Manual

DMTA-20015-01EN [U8778402], Rev. J, January 2014
7.1.8

Parameter Keys

The Parameter keys are labeled
located on the bottom of the OmniScan MX front panel. These keys are used to select
parameters for specific submenus.
Each of these keys is used to select the parameter displayed above it.
7.1.9

Indicator Lights

There are four types of indicator lights on the OmniScan MX front panel: keypad,
power, acquisition, and alarm. Each indicator light is described below.
7.1.9.1

Keypad Indicator Light

The keypad indicator light is located to the right of the Acquisition/Print key (
Its color identifies the status of the keypad (see Table 17 on page 80).
Off
Green
Orange
Red
7.1.9.2

Power Indicator Light

The power indicator light is located to the left of the Power key (
indicates the power status of the OmniScan MX (see Table 18 on page 81).
80 Chapter 7
, , ,
F7 F8 F9 F10

Table 17 Keypad indicator light statuses

Function mode
Numeric keypad
Alphanumeric keypad
Keypad locked
, , and to
F11 F12 (
), and are
).
). Its color