Lcd Screen Protector Cleaning - Olympus OmniScan MX2 User Manual

DMTA-20015-01EN [U8778402], Rev. J, January 2014
3. Make sure that the battery compartment door is closed correctly, and that an
acquisition module has been installed on the OmniScan MX.
4. To restore the instrument's original finish, clean the casing and module with a soft
cloth.
5. To remove persistent stains, use a damp cloth with a mild, soapy solution. Do not
use abrasive products or powerful solvents, which could damage the finish.
6. Once the connector protectors are removed, make sure the connectors are dry
before connecting anything else to them. If they are wet, dry them with a soft, dry
cloth, or let them air dry.
9.2.2

LCD Screen Protector Cleaning

Never use abrasive products or powerful solvents to clean the OmniScan MX screen.
Clean the screen using a damp cloth moistened with windshield washer fluid. If you
do not have windshield washer fluid, use a standard, evaporating glass cleaner. If
necessary, remove any paper-towel residue with a soft-bristle brush.
102 Chapter 9