12.2 Scanner Interface Connector; Figure 12-2 The Scanner Interface Connector; Table 25 Pinout For The Scanner Interface Connector - Olympus OmniScan MX2 User Manual

12.2 Scanner Interface Connector

Description
DE-15, female connector
Manufacturer, number
Kycon, K61-E15S-NS
Suggested cable connector
Conec, 301A10129X
Pin I/O
1 In
5
1 5

Figure 12-2 The scanner interface connector

Table 25 Pinout for the scanner interface connector

Signal
DIN1/ Digital input 1/preset
Preset1 axis 1.
Programmable input. Can
be configured as generic
input 1, or as the preset of
encoder 1. Refer to the
OmniScan software user's
manuals ("Configuring the
Digital Input" section) for
instructions on
programming this input.
To preset, you must use a
high-level signal with a
minimum signal length of
50 ms.
DMTA-20015-01EN [U8778402], Rev. J, January 2014
1
6
1 0
11
Description Current Level
TTL
Connector References 117