Figure 2-4 The OmniScan MX2 DC power adaptor plug
3.
Connect the DC power adaptor to the OmniScan MX2 DC power adaptor plug
(see Figure 2-4 on page 35).
4.
Press the power key to start the OmniScan MX2.
2.4.2
Lithium-Ion Batteries
The OmniScan MX2 holds up to two lithium-ion batteries, but will operate even with
only one battery installed. When two batteries are installed, the Omniscan MX2
operates by default using the battery with the highest charge. When both batteries are
at the same charge level, the Omniscan MX2 operates using both batteries at the same
time. This increases battery life by about 10 % compared to using each battery
individually.
Lithium-ion batteries can be inserted and removed without needing to shut down the
OmniScan MX2, provided that there is another valid power source available (DC
power adaptor or second battery).
The OmniScan MX2 also includes a lithium coin battery that does not need to be
removed or replaced by the user. The coin battery keeps the instrument clock and
masterboard configuration running.
DMTA-20015-01EN [U8778402], Rev. J, January 2014
DC power adaptor plug
Basic Operation
35