Figure N-4 Module With Pa Connector Cap - Olympus OmniScan MX2 User Manual

Before using a phased array probe that is not equipped with an EZ Latch connector,
remove the anchor base, which is secured by two screws.
You can also attach accessories to these acquisition modules using the fastening holes
(see Figure N-5 on page 188).
OMNI-M2-PA1664/16128/32128/32128PR Module Specifications

Figure N-4 Module with PA connector cap

DMTA-20015-01EN [U8778402], Rev. J, January 2014
PA connector
cap
187