Scanner Interface Adaptor; Figure 6-3 The Scanner Interface Adaptor Lemo Connector (Solder-Cup View) - Olympus OmniScan MX2 User Manual

DMTA-20015-01EN [U8778402], Rev. J, January 2014
Table 13 Pinout for the scanner interface LEMO connector (continued)
Pin I/O
11 In
12 In
13 Out
14 In
15 Out
16 –
a. N.U. = Not used
6.3

Scanner Interface Adaptor

The OmniScan MX2 is supplied with an adaptor cable, which is used to connect
scanners equipped with a DE-15 connector to the new LEMO scanner interface.
Description
LEMO connector
Manufacturer, number
LEMO, FGG.1K.316.CLA.C65Z

Figure 6-3 The scanner interface adaptor LEMO connector (solder-cup view)

66 Chapter 6
Signal
PhB Encoder 2: phase B/direction/
axis 2 N.U./N.U.
PhA Encoder 2: phase A/clock/up/
axis 2 down
DOUT3 Digital output 3
RRX RX
RTX TX
GND Ground
Description Current Level
N/A TTL
N/A TTL
±25 mA TTL
N/A RS-232
N/A RS-232
N/A