Acquisition Indicator Light; Table 18 Power Indicator Light Statuses; Table 19 Acquisition Indicator Light Statuses - Olympus OmniScan MX2 User Manual

Off
Green
Orange
Flashing orange/green
Flashing orange/red
Flashing red
7.1.9.3

Acquisition Indicator Light

The acquisition indicator light is located to the left of the Start/Stop key (
color of this light indicates the OmniScan MX operating mode (see Table 19 on
page 81).
Off
Flashing orange
If an acquisition module is removed while the OmniScan MX is turned on, the
keypad, power, and acquisition indicator lights flash red for a few seconds, and then
the unit automatically shuts down to prevent damage to the internal circuits.

Table 18 Power indicator light statuses

The OmniScan MX is turned off.
The instrument is ready (start-up
complete).
Battery charging is complete.
The OmniScan MX is shut off. Battery A is
charging.
The OmniScan MX is shut off. Battery B is
charging.
Critical factor (temperature, very weak
battery, etc.)

Table 19 Acquisition indicator light statuses

Acquisition mode
Paused analysis mode
DMTA-20015-01EN [U8778402], Rev. J, January 2014
Overview of the Equipment
). The
81