Connectors; Figure B-1 Bnc, Lemo, And Phased Array Probe Connectors; B.2 Connectors - Olympus OmniScan MX2 User Manual

DMTA-20015-01EN [U8778402], Rev. J, January 2014
B.2

Connectors

Certain acquisition modules are equipped with one phased array connector; certain
modules are equipped with BNC connectors (only OMNI-M-PA1616,
OMNI-M-PA1664, OMNI-M-PA16128, OMNI-M-PA16128PR, OMNI-M-PA1616M,
and OMNI-M-PA1664M modules) or LEMO connectors (OMNI-M-UT-8C, OMNI-
M2-PA1664, OMNI-M2-PA16128, OMNI-M2-PA32128, OMNI-M2-PA32128PR and
OMNI-M2-UT-2C).
R1
BNC or LEMO connector used for the reception of ultrasonic signals when using
the pitch-catch inspection technique.
P1
BNC or LEMO connector used for the transmission of ultrasonic signals when
using the pitch-catch or the pulse-echo technique.
PHASED ARRAY
Connector used for phased array probes.
The compatible probe connectors are presented in Figure B-1 on page 130.
BNC connector

Figure B-1 BNC, LEMO, and phased array probe connectors

130 Appendix B
LEMO connector
Phased array probe connector