Lithium-Ion Batteries; Figure 8-1 The Omniscan Mx Dc Power Adaptor Plug; Dmta-20015-01En [U8778402], Rev. J, January - Olympus OmniScan MX2 User Manual

2. On the right-hand side of the OmniScan MX, lift the rubber seal covering the DC
adaptor connector plug (see Figure 8-1 on page 89).
DC power
adaptor plug

Figure 8-1 The OmniScan MX DC power adaptor plug

3. Connect the DC power adaptor to the OmniScan MX DC power adaptor plug (see
Figure 8-1 on page 89).
4. Press the Power key to start the OmniScan MX.
8.2.2

Lithium-Ion Batteries

The OmniScan MX holds up to two lithium-ion batteries, but will operate even with
only one battery installed. When two batteries are installed, the OmniScan MX
operates by default using the battery with the highest charge, and automatically
switches to the second battery once the first battery's remaining charge is less
than 5 %.

DMTA-20015-01EN [U8778402], Rev. J, January 2014

Basic Operation 89