Dmta-20015-01En [U8778402], Rev. J, January - Olympus OmniScan MX2 User Manual

Table 26 Pinout for the alarm and I/O connector (continued)
Pin I/O Signal
7 Out DOUT4
8 Out DOUT3
9 In DIN4/
ExtPace

DMTA-20015-01EN [U8778402], Rev. J, January 2014

Description
Digital output 4
Digital output 3
Digital input 4/external
pace input.
Programmable input. Can
be configured as generic
input 4, or as external pace
input (high level with a
minimum signal length of
50 ms when used as DIN4,
or 21 µs as ExtPace).
Refer to the OmniScan
software user's manuals
("Configuring the Digital
Input" section) for
information on
programming this input.
Current Level
±15 mA TTL
±15 mA TTL
TTL
Connector References 121