Basic Operation; Turning On And Off The Omniscan Mx2 - Olympus OmniScan MX2 User Manual

2. Basic Operation

This chapter describes the basic principles and procedures involved in operating the
OmniScan MX2 instrument.
2.1

Turning On and Off the OmniScan MX2

This section explains how to turn on and off the OmniScan MX2.
To turn on the OmniScan MX2
In order to prevent injury, do not place your fingers between the acquisition module
and the instrument's support stand (when unfolded).
 Press the Power key (
The system starts up and performs a memory check. If there is more than one
application installed on your instrument, each application will be displayed on
one of the buttons appearing on the OmniScan MX2 touch screen. Choose the
desired inspection application by tapping the appropriate menu on the touch
screen.
DMTA-20015-01EN [U8778402], Rev. J, January 2014
) for one second.
Basic Operation 31