Top Panel; Rear Panel; Figure 7-5 Top Panel Of The Omniscan Mx - Olympus OmniScan MX2 User Manual

7.4

Top Panel

There are three connectors located on the top panel of the OmniScan MX (see
Figure 7-5 on page 85).
Scanner interface
Used to connect a mechanical scanner.
Alarm and I/O
Used as an alarm output and control input.
SVGA output
An external VGA or SVGA monitor that mirrors the OmniScan MX display may
be connected to this DB-15 port.
7.5

Rear Panel

The rear panel consists of the acquisition module currently connected to the
OmniScan MX. More information about each module's capabilities is available in the
respective appendix.
Scanner Alarm and I/O
interface

Figure 7-5 Top panel of the OmniScan MX

DMTA-20015-01EN [U8778402], Rev. J, January 2014
SVGA
output
Overview of the Equipment 85