Installation Of The Cabinet System; Figure 15: Crane Transport - KEB COMBIVERT F5 Instructions For Use Manual

MEcHANIcAL INSTALLATION

5.4 Installation of the cabinet system

The cabinet system is delivered with lifting eye. These are used to accommodate
corresponding lifting devices. The lifting eyes can be removed after the transport. After
removing the lifting eyes, the original fixing screws must be screwed again in order to
ensure the degree of protection IP54.
WArNING
WArNING
Figure 15: Crane transport
Risk of tipping without fixed screw!
► After reaching the final position, screw the cabinet system firmly
with the ground and the wall at all fixing points.
► If this is not possible due to the installation location, at least one of
the two options (floor or wall) must be used.
Incorrect chain angle damages the lifting eyes !
► Maintain a chain angle of at least 60°.
► Do not stand under suspended cabinet system during transport.
60°
47