System Variations; Basic System; Basic System With Additional Sinusoidal Output Filter; Accessories And Options - KEB COMBIVERT F5 Instructions For Use Manual

OVErVIEW cAbINET SYSTEM

4.1 System variations

The cabinet system is available in different variations which can be combined. The base
system always serves as basis.

4.1.1 basic system

•
•
•
•
•
•
•
•
•

4.1.2 Basic system with additional sinusoidal output filter

The basic system is extended by an additional 600 mm TS8 control cabinet, which
contains the sinus output filter. Optionally, braking resistors can be installed above the
sine output filter.

4.1.3 Accessories and options

The cabinet system can be ordered in different variants. There are several options that
extend the scope of functions. These options are factory-integrated when ordering and
will be taken into consideration in the control cabinet documentation, however they
may cause a change of the dimensions.
basic system with additional connection cabinet
The basic system is extended by an additional 200 mm TS8 control cabinet, which offers
the possibility to insert and connect the supply lines (L1 / L2 / L3) from above.
basic system with main switch and NH fuse
The basic system is extended by an additional 400 mm TS8 control cabinet. Instead of
the circuit breaker, there is a contactor, e.g. DIL 1000. The additional control cabinet is
equipped with a mechanical main switch, NH fuses, as well as the mains connections.
basic system with Dc-busbar
It is possible to install a DC-busbar with DC fuses above the cabinet system in order to
connect additional components. This should be designed and configured together with
KEB.
40
Circuit breaker with motor drive
Varistors
HF filter
AFE filter
Drive converter
Motor connection terminals
LW heat exchanger
Liquid distributors
Control elements (HMI, DEIF I / O outputs, STO, 24V DC supply, PLC control, bus
system)