Starting Radius Accounting - Cisco Catalyst 2960 Software Configuration Manual

Chapter 9 Configuring Switch-Based Authentication
Beginning in privileged EXEC mode, follow these steps to specify RADIUS authorization for privileged
EXEC access and network services:
Command
Step 1 configure terminal
Step 2
aaa authorization network radius
Step 3
aaa authorization exec radius
Step 4
end
Step 5
show running-config
Step 6 copy running-config startup-config
To disable authorization, use the no aaa authorization {network | exec} method1 global configuration
command.

Starting RADIUS Accounting

The AAA accounting feature tracks the services that users are accessing and the amount of network
resources that they are consuming. When AAA accounting is enabled, the switch reports user activity to
the RADIUS security server in the form of accounting records. Each accounting record contains
accounting attribute-value (AV) pairs and is stored on the security server. This data can then be analyzed
for network management, client billing, or auditing.
Beginning in privileged EXEC mode, follow these steps to enable RADIUS accounting for each Cisco
IOS privilege level and for network services:
Command
Step 1 configure terminal
Step 2 aaa accounting network start-stop
radius
Step 3 aaa accounting exec start-stop radius
Step 4 end
Step 5 show running-config
Step 6
copy running-config startup-config
To disable accounting, use the no aaa accounting {network | exec} {start-stop} method1... global
configuration command.
OL-26520-01
Purpose
Enter global configuration mode.
Configure the switch for user RADIUS authorization for all
network-related service requests.
Configure the switch for user RADIUS authorization if the user has
privileged EXEC access.
The exec keyword might return user profile information (such as
autocommand information).
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Enable RADIUS accounting for all network-related service requests.
Enable RADIUS accounting to send a start-record accounting notice at
the beginning of a privileged EXEC process and a stop-record at the end.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Controlling Switch Access with RADIUS
9-35