Cisco Catalyst 2960 Software Configuration Manual page 374

Configuring Ethernet Interfaces
Gi0/2
Available : The PoE received on this link is used for powering this switch and
Back-up
Available*: The PoE received on this link is used for powering this switch but
Back-up*
You can see the available power and the power required by each connected device by entering the show
power inline privileged EXEC command.
This is an example of output from a Catalyst 2960CPD-8PT, capable of providing pass-through power:
Switch# show power inline
Available:22.4(w)
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Fa0/1
Fa0/2
Fa0/3
Fa0/4
Fa0/5
Fa0/6
Fa0/7
Fa0/8
Enter the show power inline police privileged EXEC command to see power monitoring status.
This is an example of output from a Catalyst 2960CPD-8PT:
Switch# show power inline police
Available:22.4(w)
Interface Admin
--------- ------ ---------- ---------- ---------- ------ -----
Fa0/1
Fa0/2
Fa0/3
Fa0/4
Fa0/5
Fa0/6
Fa0/7
Fa0/8
--------- ------ ---------- ---------- ---------- ------ -----
Totals:
The Catalyst 2960CPD-8TT and Catalyst 2960CG-8TC downlink ports cannot provide power to end
devices. This is an example of output from the show power inline command on a C2960CPD-8TT
switch:
Switch# show power inline
Available:0.0(w)
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
12-38
Type1 15.4(w)
providing PoE pass-through if applicable.
: In the absence of 'Available' power mode, the PoE received on this
link is used for powering this switch and providing PoE pass-through
if applicable.
does not contribute to the PoE pass-through.
: In the absence of 'Available' power mode, the PoE received on this
link is used for powering this switch but does not contribute to
the PoE pass-through.
Used:15.4(w)
Oper Power
(Watts)
auto off 0.0
auto off 0.0
auto off 0.0
auto off 0.0
auto on 15.4
auto off 0.0
auto off 0.0
auto off 0.0
Used:15.4(w)
Oper Admin
State State Police
auto off none
auto off none
auto off none
auto off none
auto on none
auto off none
auto off none
auto off none
Used:0.0(w) Remaining:0.0(w)
Oper Power
(Watts)
Chapter 12
Back-up
Remaining:7.0(w)
Device
n/a
n/a
n/a
n/a
IP Phone 8961
n/a
n/a
n/a
Remaining:7.0(w)
Oper Cutoff Oper
Police Power
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
Device
Configuring Interface Characteristics
Class Max
n/a 15.4
n/a 15.4
n/a 15.4
n/a 15.4
4 15.4
n/a 15.4
n/a 15.4
n/a 15.4
Power
0.0
0.0
0.0
0.0
9.5
0.0
0.0
0.0
9.5
Class Max
OL-26520-01