Cisco Catalyst 2960 Software Configuration Manual page 49

Overview
This chapter provides these topics about the Catalyst 2960, 2960-S and 2960-C switch software:
•
•
•
•
Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.
In this document, IP refers to IP Version 4 (IPv4) unless there is a specific reference to IP Version 6
(IPv6).
Features
The switch supports a LAN base image or a LAN lite image with a reduced feature set, depending on
switch hardware.
•
•
•
•
•
•
•
•
•
•
•
OL-26520-01
Features, page 1-1
Default Settings After Initial Switch Configuration, page 1-17
Network Configuration Examples, page 1-19
Where to Go Next, page 1-26
Ease-of-Deployment and Ease-of-Use Features, page 1-2
Performance Features, page 1-4
Management Options, page 1-5
Manageability Features, page 1-6
Availability and Redundancy Features, page 1-8
VLAN Features, page 1-9
Security Features, page 1-10
QoS and CoS Features, page 1-13
Power over Ethernet Features, page 1-15
Universal Power over Ethernet Features, page 1-15
Monitoring Features, page 1-16
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
1
C H A P T E R
1-1