Cisco Catalyst 2960 Software Configuration Manual page 841

Chapter 35 Configuring IPv6 Host Functions
This is an example of the output from the show ipv6 neighbor privileged EXEC command:
Switch# show ipv6 neighbors
IPv6 Address
3FFE:C000:0:7::777
3FFE:C101:113:1::33
This is an example of the output from the show ipv6 route privileged EXEC command:
Switch# show ipv6 route
IPv6 Routing Table - Default - 1 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
L FF00::/8 [0/0]
OL-26520-01
via Null0, receive
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Age Link-layer Addr State Interface
- 0007.0007.0007 REACH Vl7
- 0000.0000.0033 REACH Fa1/0/13
Displaying IPv6
35-13