Cisco Catalyst 2960 Software Configuration Manual page 927

Chapter 40 Configuring Online Diagnostics
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Switch will reload after test list completion / NA
P/* - will partition stack / NA
ID
==== ================================== ============ =============== =====
1)
2)
3)
4)
5)
6)
This example shows how to display the online diagnostic results for a switch:
Switch# show diagnostic result
Switch 1: SerialNo :
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
1) TestPortAsicStackPortLoopback ---> .
2) TestPortAsicLoopback ------------> .
3) TestPortAsicCam -----------------> .
4) TestPortAsicRingLoopback --------> .
5) TestMicRingLoopback -------------> .
6) TestPortAsicMem -----------------> .
This example shows how to display the online diagnostic test status:
Switch# show diagnostic status
<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
<OD> - OnDemand Diagnostics, <SCH> - Scheduled Diagnostics
====== ================================= =============================== ======
Card
------ --------------------------------- ---------------------
1
2
3
4
====== ====
============================= =============================== ======
Switch#
This example shows how to display the online diagnostic test schedule for a switch:
Switch# show diagnostic schedule switch 1
Current Time = 14:39:49 PST Tue Jul 5 2005
Diagnostic for Switch 1:
Schedule #1:
To be run daily 12:00
Test ID(s) to be executed: 1.
OL-26520-01
Test Name
TestPortAsicStackPortLoopback
TestPortAsicLoopback
TestPortAsicCam
TestPortAsicRingLoopback
TestMicRingLoopback
TestPortAsicMem
Description
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Displaying Online Diagnostic Tests and Test Results
Test Interval
attributes day hh:mm:ss.ms shold
B*N****A** 000 00:01:00.00 n/a
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
B*D*X**IR* not configured
Current Running Test
N/A
TestPortAsicStackPortLoopback
TestPortAsicLoopback
TestPortAsicCam
TestPortAsicRingLoopback
TestMicRingLoopback
TestPortAsicMem
N/A
N/A
Thre-
n/a
n/a
n/a
n/a
n/a
Run by
------
N/A
<OD>
<OD>
<OD>
<OD>
<OD>
<OD>
N/A
N/A
40-5