Unsupported Global Configuration Command - Cisco Catalyst 2960 Software Configuration Manual

QoS
QoS

Unsupported Global Configuration Command

priority-list
Unsupported Interface Configuration Commands
priority-group
rate-limit
Unsupported Policy-Map Configuration Command
class class-default where class-default is the class-map-name.
RADIUS
Unsupported Global Configuration Commands
aaa nas port extended
aaa authentication feature default enable
aaa authentication feature default line
aaa nas port extended
authentication command bounce-port ignore (only on switches running the LAN Lite image)
authentication command disable-port ignore (only on switches running the LAN Lite image)
radius-server attribute nas-port
radius-server configure
radius-server extended-portnames
SNMP
Unsupported Global Configuration Commands
no monitor session all (only on switches running the LAN Lite image)
snmp-server enable informs
snmp-server enable traps hsrp
snmp-server enable traps rtr (only on switches running the LAN Lite image)
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
B-6
Appendix B Unsupported Commands in Cisco IOS Release 15.0(1)SE
OL-26520-01