Configuration Compatibility Issues - Cisco Catalyst 2960 Software Configuration Manual

Recommendations for Upgrading a
Catalyst 2950 Switch to a Catalyst 2960 Switch
This appendix describes the configuration compatibility issues and the feature behavior differences that
you might encounter when you upgrade a Catalyst 2950 switch to a Catalyst 2960 switch.
This appendix consists of these sections:
•
•

Configuration Compatibility Issues

The configuration commands between the two switch platforms differ for these reasons:
•
•
If you use a Catalyst 2950 switch command, it might not be supported on the Catalyst 2960 switch. The
Catalyst 2960 switch software handles the incompatible commands in these ways:
•
•
OL-26520-01
Configuration Compatibility Issues, page A-1
Feature Behavior Incompatibilities, page A-5
The Catalyst 2950 switch runs Cisco IOS 12.1EA software, and the Catalyst 2960 switch runs Cisco
IOS 12.2SE software.
The switch families have different hardware.
They are accepted and translated. A message appears.
They are rejected. A message appears.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
A P P E N D I X
A
A-1