Cisco Catalyst 2960 Software Configuration Manual page 761

Chapter 33 Configuring QoS
Table 33-2 Traffic Types, Packet Labels, and Queues (continued)
1
VoIP
Traffic
CoS-to-Ingress 4, 5 (queue 2)
Queue Map
CoS-to-Egress 4, 5
Queue Map (queue 1)
1. VoIP = voice over IP
Table 33-3
Ingress Queue
SRR shared
Priority
Table 33-4 Auto-QoS Configuration for the Egress Queues
Egress Queue Queue Number
Priority 1
SRR shared 2
SRR shared 3
SRR shared 4
When you enable auto-QoS by using the auto qos voip cisco-phone, the auto qos voip cisco-softphone,
or the auto qos voip trust interface configuration command, the switch automatically generates a QoS
configuration based on the traffic type and ingress packet label and applies the commands listed in
Table 33-5
Enhanced Auto-QoS for Video, Trust, and Classification
Note The enhanced auto-QoS feature is not supported on switches running LAN Lite images.
In Cisco IOS Release 12.2(55)SE, auto-QoS is enhanced to support video. Automatic configurations are
generated that classify and trust traffic from Cisco TelePresence systems and Cisco IP cameras.
When you configure the auto qos {video | classify | trust} enhanced commands on a switch port, this
behavior occurs:
•
OL-26520-01
Data VoIP Control Routing Protocol
Traffic Traffic
2, 3, 6, 7 (queue 2)
Auto-QoS Configuration for the Ingress Queues
Queue Number
1
2
CoS-to-Queue Map
4, 5
2, 3, 6, 7
0
1
For information about the trusted boundary feature, see the
Ensure Port Security" section on page
to the port.
Auto qos voip generated commands that you configured on the interface before Cisco IOS Release
12.2(55)SE migrate to the enhanced commands.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
STP BPDU Real-Time
Traffic Video Traffic
0 (queue 3)
Queue Weight
CoS-to-Queue Map (Bandwidth)
0, 1, 2, 3, 6, 7 70 percent
4, 5 30 percent
Queue (Buffer) Size
Queue Weight for Gigabit-Capable
(Bandwidth) Ports
up to100 percent 25 percent
10 percent 25 percent
60 percent 25 percent
20 percent 25 percent
"Configuring a Trusted Boundary to
39-42.
Configuring Auto-QoS
All Other Traffic
0, 1, 2, 3, 6, 7(queue 1)
2 (queue 3) 0, 1
(queue 4)
Queue (Buffer)
Size
90 percent
10 percent
Queue (Buffer)
Size for 10/100
Ethernet Ports
15 percent
25 percent
40 percent
20 percent
33-23