Cisco Catalyst 2960 Software Configuration Manual page 242

Chapter 9 Configuring Switch-Based Authentication
Controlling Switch Access with RADIUS
configuration commands: radius-server timeout, radius-server retransmit, and radius-server key. To
apply these values on a specific RADIUS server, use the radius-server host global configuration
command.
Note If you configure both global and per-server functions (timeout, retransmission, and key commands) on
the switch, the per-server timer, retransmission, and key value commands override global timer,
retransmission, and key value commands. For information on configuring these settings on all RADIUS
servers, see the "Configuring Settings for All RADIUS Servers" section on page 9-36.
You can configure the switch to use AAA server groups to group existing server hosts for authentication.
For more information, see the "Defining AAA Server Groups" section on page 9-32.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
9-28
OL-26520-01