Cisco Catalyst 2960 Software Configuration Manual page 529

Hide thumbs Also See for Catalyst 2960:
Table of Contents

Advertisement

Chapter 20
Configuring DHCP and IP Source Guard Features
In the port field of the circuit-ID suboption, the port numbers start at 3. For example, on a switch with
24 10/100 ports and small form-factor pluggable (SFP) module slots, port 3 is the Fast Ethernet x/0/1
port, port 4 is the Fast Ethernet x/0/2 port, and so forth, where x is the stack member number. Port 27 is
the SFP module slot 0/1, and so forth.
Figure 20-2
circuit-ID suboption, the module number corresponds to the switch number in the stack. The switch uses
the packet formats when you globally enable DHCP snooping and enter the ip dhcp snooping
information option global configuration command.
Figure 20-2
Circuit ID Suboption Frame Format
Suboption
type
1
1 byte
Remote ID Suboption Frame Format
Suboption
type
2
1 byte
Figure 20-3
switch uses these packet formats when DHCP snooping is globally enabled and when the ip dhcp
snooping information option format remote-id global configuration command and the ip dhcp
snooping vlan information option format-type circuit-id string interface configuration command are
entered.
The values for these fields in the packets change from the default values when you configure the
remote-ID and circuit-ID suboptions:
Circuit-ID suboption fields
Remote-ID suboption fields
OL-26520-01
shows the packet formats for the remote-ID suboption and the circuit-ID suboption. For the
Suboption Packet Formats
Circuit
ID type
Length
Length
6
0
4
VLAN
1 byte 1 byte 1 byte
2 bytes
Remote
ID type
Length
Length
8
0
6
1 byte 1 byte 1 byte
shows the packet formats for user-configured remote-ID and circuit-ID suboptions The
The circuit-ID type is 1.
The length values are variable, depending on the length of the string that you configure.
The remote-ID type is 1.
The length values are variable, depending on the length of the string that you configure.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Module Port
1 byte 1 byte
MAC address
6 bytes
Understanding DHCP Snooping
20-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2960-s

Table of Contents