Cisco Catalyst 2960 Software Configuration Manual page 163

Chapter 11 Configuring Web-Based Authentication
Displaying Web-Based Authentication Status
Perform this task to display the web-based authentication settings for all interfaces or for specific ports:
Command
Step 1
show authentication sessions
[interface type slot/port]
This example shows how to view only the global web-based authentication status:
Switch# show authentication sessions
This example shows how to view the web-based authentication settings for gigabit interface 3/27:
Switch# show authentication sessions interface gigabitethernet 3/27
OL-26520-01
Purpose
Displays the web-based authentication settings.
type = fastethernet, gigabitethernet, or tengigabitethernet
(Optional) Use the interface keyword to display the
web-based authentication settings for a specific interface.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Displaying Web-Based Authentication Status
11-17