Cisco Catalyst 2960 Software Configuration Manual page 55

Chapter 1 Overview
Support for CDP and LLDP enhancements for exchanging location information with video end
•
points for dynamic location-based content distribution from servers
• Network Time Protocol (NTP) version 4 for NTP time synchronization for both IPv4 and IPv6
Cisco IOS File System (IFS) for providing a single interface to all file systems that the switch uses
•
Configuration logging to log and to view changes to the switch configuration
•
Unique device identifier to provide product identification information through a show inventory
•
user EXEC command display
In-band management access through the device manager over a Netscape Navigator or Microsoft
•
Internet Explorer browser session
• In-band management access for up to 16 simultaneous Telnet connections for multiple CLI-based
sessions over the network
• In-band management access for up to five simultaneous, encrypted Secure Shell (SSH) connections
for multiple CLI-based sessions over the network
Support for SSH for IPv6.
•
• Support for IPv6 Host on the LAN Base and LAN Lite image (Catalyst 2960 and 2960-S).
• In-band management access through SNMP Versions 1, 2c, and 3 get and set requests
• Out-of-band management access through the switch console port to a directly attached terminal or
to a remote terminal through a serial connection or a modem
• Out-of-band management access through the Ethernet management port to a PC (Catalyst
2960-only)
Secure Copy Protocol (SCP) feature to provide a secure and authenticated method for copying
•
switch configuration or switch image files (requires the cryptographic version of the software) for
both IPv4 and IPv6
Configuration replacement and rollback to replace the running configuration on a switch with any
•
saved Cisco IOS configuration file
The HTTP client in Cisco IOS supports can send requests to both IPv4 and IPv6 HTTP server, and
•
the HTTP server in Cisco IOS can service HTTP requests from both IPv4 and IPv6 HTTP clients
Simple Network and Management Protocol (SNMP) can be configured over IPv6 transport so that
•
an IPv6 host can send SNMP queries and receive SNMP notifications from a device running IPv6
IPv6 stateless autoconfiguration to manage link, subnet, and site addressing changes, such as
•
management of host and mobile IP addresses
• Disabling MAC address learning on a VLAN
DHCP server port-based address allocation for the preassignment of an IP address to a switch port.
•
Wired location service sends location and attachment tracking information for connected devices to
•
a Cisco Mobility Services Engine (MSE)
Note
CPU utilization threshold trap monitors CPU utilization
•
Note
OL-26520-01
To use wired location, the switch must be running the LAN Base image.
To use CPU utilization, the switch must be running the LAN Base image.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Features
1-7